...
Information about WiscNet Managed Customer Premises Equipment (CPE)
WiscNet Managed
Cisco ASR920
Model ASR-920-4SZ-A
- Power Supply 0
- Power Supply 1
- Power Supply 0 LED
- Power Supply 1 LED
RJ-48 slot for ToD (Time of Day)
RJ-48 slot for BITS (Building Integrated Timing Source)
- Management Port (Ethernet)
- Console Port (TIA/EIA-232F)
- Auxiliary Console (RS232)
- This port requires the A920-CONS-KIT-S adapter
- RJ45 1G port 1
- RJ45 1G port 0
- SFP/SFP+ 1G/10G port
- SFP/SFP+ 1G/10G port 4
- SFP/SFP+ 1G/10G port 5
- SFP/SFP+ 1G/10G port 6
- Alarm Port
- USB Console Port
- requires USB driver (asr-9xx_usbconsole_drivers.zip)
- requires USB A-A cable
- requires terminal program such as Putty
- Power Status LED
- USB Memory Port
- System Status LED (See this link for LED error decoding)
- ZTP Button (Zero Touch Provisioning)
Additional Info
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
Cisco ME3400
- LEDs
- Alarm Input Port
- Console Port (RS232)
- Ethernet Management Port
- Air Intake Vents
- Copper Ports 1, 2
- 1g SFP Ports 3, 4 (NNI)
- 1g SFP Ports 1, 2 (UNI/ENI)
Additional Info
Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide
WiscNet on BadgerNet
In many cases the circuit will come into the Ceina box, over to a patch panel, and then to the Juniper.
Images provided below to help identify which devices is in which role to help confirm power and link.
NTE
BadgerNet uses Junpier EX2200, EX2300 devices to provide Layer2 connectivity for WiscNet on BadgerNet. These devices typically have a fiber uplink to an Optical device, listed below.
Optical
Devices used by last mile provider to provide layer1 connectivity to the Layer2 BadgerNet NTE. Device model varies by provider, examples of possibilities are below.
