Overview

• Optics have thresholds for how strong or weak of a light level they can receive before they'll theoretically fail

• The purpose of this page is to help estimate if a particular optic will work on a particular fiber span
  
  

• Ballpark estimates:
  • 0.25dB loss per kilometer for 1550nm
  • 0.5 dB loss per kilometer for 1310nm
  • 0.3 dB loss per connector

Tools & Resources 

• DOM

  • See our knowledge base page Optical: Digital Optical Monitoring (DOM)

  • Command line tools to see reported RX and TX light levels of and optic inserted in a router or switch and current levels

• Vendor Docs

  • You should also be able to search your optical vendor's documents to find the rx and tx thresholds for each model optic

  • Example: https://www.flexoptix.net/en/sfp-plus-zr-transceiver-10-gigabit-stm64-sm-1550nm-80km-23db-ddm-dom.html

    • RECEIVE MIN. -23.00dBm

    • RECEIVE MAX. (RECEIVER OVERLOAD) -8.00dBm

    • TRANSMIT MIN. 0.00dBm

    • TRANSMIT MAX. 5.00dBm

    • POWERBUDGET (DB) 23 dB

• OTDR

  • See Optical: Optical Time-Domain Reflectometer (OTDR) 

  • An OTDR is always preferred to accurately determine your path's loss

  • The calculations performed on this page are intended to help when you don't have an OTDR test to rely on

• Power meter

  • Tool used to report the current light levels (dBm) being received 

• Pads/Attenuators

  • Used to attenuate the light power level to be within the threshold of an optic

  • Always pad optics on the the rx ports of your optics 

    • One pad on the rx port of the hub interface, one pad on the rx port of the cpe interface

    • The RX port on an optic should be the right-hand side if the lever is facing up

  • Example images:

    

  • 

Calculating Loss

1. Record the TX power of your optic
   1. Either by using DOM or a power meter
2. Subtract the OTDR results (loss in dB)
   
   1. If you don't have OTDR test results, subtract the estimated loss based on the distance
3. Subtract the connector loss (number of patches)
4. Results
   1. Is the result within your optic's receive min -> max? 
      1. If it's above the max RX add the appropriate pad
      2. If it's below the max RX you might need a different optic or 

Example:

1. I'm transmitting at +1dB
2. I don't have an OTDR, but the fiber path distance is 27km
   1. Subtract 0.4 dB loss per kilometer for 1550nm at 27km, subtract 10.8dB
3. I'm using two patch cables, one on each side of my fiber span, subtract ~1dB
4. Result: −10.8dB
5. My result of -10.8dB is within the -8dB to -23dB receive specification for the optic
   1. I shouldn't need a pad
   2. My optic should work