...
We'll keep NRG graphs up and running through the middle of May, after which they will automatically redirect to the new graphs.
Searching
Search for your Member Organization name. Use shorter sections of text, such as "Abbotsford" or "Wrightstown"
...
Term | Description |
---|---|
Member Organization | Name of organization |
Device A / Z | Hostname of the WiscNet devices on either side of your uplink |
Interface A / Z | Router interface names |
Bandwidth | Capacity of link in mbps |
Site Code | Code used to help correlate graphs to Member Organization |
Transport Provider | Who you may be using as a transport provider |
Transport Provider ID A / Z | Circuit ID from the transport provider |
WiscNet Circuit ID | Internal WiscNet identifier for your circuit |
Circuit Graphs
Tip |
---|
Traffic shown is from WiscNet's Backbone interface. This means that in is an upload from a member site and out is a download to a member site. |
Term | Example Graph | Description |
---|---|---|
bps | Bits per second | |
pps | Packets per Second | |
Utilization | Percentage of connection used. If you have a 1Gbps connection that is using 100Mbps, this should show approximately 1/10th full. | |
Errors | Number of ethernet or CRC errors on the link. Ideally this should be zero and the graph should be pretty boring. If you see errors, contact support to troubleshoot. | |
Discards | Number of discards on an interface. Discards typically occur when a link is saturated |
Device Graphs
These are sensors and indicators on your WiscNet Managed Device (CPE). These graphs will not be visible if you do not have a device.
...