...
| Term | Description |
|---|---|
| Member Organization | Name of organization |
| Device A / Z | Hostname of the WiscNet devices on either side of your uplink |
| Interface A / Z | Router interface names |
| Bandwidth | Capacity of link in mbps |
| Site Code | Code used to help correlate graphs to Member Organization |
| Transport Provider | Who you may be using as a transport provider |
| Transport Provider ID A / Z | Circuit ID from the transport provider |
| WiscNet Circuit ID | Internal WiscNet identifier for your circuit |
Circuit Graphs
| Tip |
|---|
Traffic shown is from WiscNet's Backbone interface. This means that in is an upload from a member site and out is a download to a member site. |
| Term | Example Graph | Description |
|---|---|---|
| bps |
| Bits per second |
| pps |
| Packets per Second |
| Utilization |  | Percentage of connection used. If you have a 1Gbps connection that is using 100Mbps, this should show approximately 1/10th full. |
| Errors |
| Number of ethernet or CRC errors on the link. Ideally this should be zero and the graph should be pretty boring. If you see errors, contact support to troubleshoot. |
| Discards |
| Number of discards on an interface. Discards typically occur when a link is saturated |
...