You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Where to look to set Recursive DNS servers on various platforms and services. See WiscNet Servers for DNS server IP addresses.

Windows

System


  1. Go to the Control Panel.
  2. Click Network and Internet > Network and Sharing Center > Change adapter settings.
  3. To change the settings for an Ethernet connection, right-click the Ethernet interface and select Properties.
  4. Select the Networking tab. Under This connection uses the following items, select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) and then click Properties.

  5. Click Advanced and select the DNS tab. If there are any DNS server IP addresses listed there, write them down for future reference, and remove them from this window.

DHCP Server



DNS Server


Forwarders may be empty if you are using Root Hints


  1. Run → dnsmgmt.msc
  2. Right-click the server name in the left column, choose Properties
  3. Navigate to the Forwarders tab
  4. Edit IP addresses in list to match the Recursive DNS servers listed on WiscNet Servers


Firewalls

Cisco

Fortigate

Palo Alto

  • No labels