Information
Member bandwidth graphs may be found at graphs.wiscnet.net.
If you are searching for your connection, put a few letters of your member name into the search box. If you happen to know your Connection ID, type it in and it should take you direct to your graph. Once found, feel free to bookmark it.
Terminology
Connection
Traffic shown is from WiscNet's Backbone interface. This means that in is an upload from a member site and out is a download to a member site.
Term | Example Graph | Description |
---|---|---|
bps | Bits per second | |
pps | Packets per Second | |
Utilization | Percentage of connection used. If you have a 1Gbps connection that is using 100Mbps, this should show approximately 1/10th full. | |
Errors | Number of ethernet or CRC errors on the link. Ideally this should be zero and the graph should be pretty boring. If you see errors, contact support to troubleshoot. | |
Discards | Number of discards on an interface. Discards typically occur when a link is saturated |
Device
These are sensors and indicators on your WiscNet Managed Device (CPE). These graphs will not be visible if you do not have a device.
Term | Example Graph | Description |
---|---|---|
Ping Response Time | Time in milliseconds it took our monitoring server to ping WiscNet router on premise. Ping is currently sourcing from Eau Claire, WI. | |
CPU | Processor utilization of device | |
Temperature | Internal temperature of device. Some models will have multiple sensors. Y axis changes dynamically. | |
Memory | Memory utilization of WiscNet router. Some devices may display multiple readings depending on memory pool | |
Uptime | Length of time in days since WiscNet router has last rebooted. Always up and to the right. Read the legend to get the time in days. Older devices show this value reset every 497 days due a limitation of SNMP. |